Latest News

Wearable technology converts body heat to electricity

electricity

Researchers at North Carolina State University have developed a new design for harvesting body heat and converting it into electricity for use in wearable electronics. The experimental prototypes are lightweight, conform to the shape of the body, and can generate far more electricity than previous lightweight heat harvesting technologies, according to the researchers.

The researchers also identified the optimal site on the body for heat harvesting.

“Wearable thermoelectric generators (TEGs) generate electricity by making use of the temperature differential between your body and the ambient air,” said Daryoosh Vashaee, an associate professor of electrical and computer engineering at NC State and corresponding author of a paper on the work.

“Previous approaches either made use of heat sinks – which are heavy, stiff and bulky – or were able to generate only one microwatt or less of power per centimetre squared (µW/cm²). Our technology generates up to 20 µW/cm² and doesn’t use a heat sink, making it lighter and much more comfortable.”

The new design begins with a layer of thermally conductive material that rests on the skin and spreads out the heat. The conductive material is topped with a polymer layer that prevents the heat from dissipating through to the outside air. This forces the body heat to pass through a centrally-located TEG that is 1cm². Heat that is not converted into electricity passes through the TEG into an outer layer of thermally conductive material, which rapidly dissipates the heat. The entire system is thin – only 2 millimetres – and flexible.

electricity
Study co-lead Haywood Hunter, demonstrates the TEG-embedded T-shirt at work.

“In this prototype, the TEG is only one centimetre squared, but we can easily make it larger, depending on a device’s power needs,” said Vashaee, who worked on the project as part of the National Science Foundation’s Nanosystems Engineering Research Center for Advanced Self-Powered Systems of Integrated Sensors and Technologies (ASSIST) at NC State.

The researchers also found that the upper arm was the optimal location for heat harvesting. While the skin temperature is higher around the wrist, the irregular contour of the wrist limited the surface area of contact between the TEG band and the skin. Meanwhile, wearing the band on the chest limited air flow – limiting heat dissipation – since the chest is normally covered by a shirt.

In addition, the researchers incorporated the TEG into T-shirts. They found that the T-shirt TEGs were still capable of generating 6µW/cm² – or as much as 16µW/cm² if a person is running.

“T-shirt TEGs are certainly viable for powering wearable technologies, but they’re just not as efficient as the upper arm bands,” said Vashaee.

“The goal of ASSIST is to make wearable technologies that can be used for long-term health monitoring, such as devices that track heart health or monitor physical and environmental variables to predict and prevent asthma attacks.

“To do that, we want to make devices that don’t rely on batteries. And we think this design and prototype moves us much closer to making that a reality.”

Send this to a friend