EnSilica has announced it has developed sureCore’s new, ultra-low power IoT reference platform targeted principally at the development of the next generation of wearable consumer and medical applications.
With expertise in low power SoC design for battery-powered applications, EnSilica’s silicon team is able to deliver a turn-key service covering complex digital and analogue/RF technologies for both ASICs and SoCs down to 28nm.
The service extends from system architecting and design specification through development and implementation to the supply of production silicon. EnSilica also offers point services within the whole systems design, development and IC supply cycle. Additionally, EnSilica maintains in-depth partnership with all the major silicon foundries.
The sureCore IoT reference platform has been taped out using TSMC’s 40nm Ultra Low Power (40ULP) process technology. TSMC’s 40nm process integrates 193nm immersion lithography technology and ultra-low-k connection material to increase chip performance, while simultaneously lowering power consumption.
Specifically developed for IoT and wearable applications, TSMC’s 40ULP process cuts leakage current by up to 70 per cent and lowers power consumption by up to 30 per cent compared to its Low Power (LP) process.
The sureCore IoT reference platform incorporates derivations of both its EverOn and PowerMiser SRAM IP product lines. By examining the fundamental limitations of conventional SRAM architecture to develop novel, patented circuit designs, architecture techniques, and assist circuits, coupled with foundry-supplied, high density SRAM bit cells, sureCore’s SRAM IP is capable of operation at near-threshold bit cell retention voltages and delivering significant dynamic/static power savings. EverOn is capable of operation with supply voltages between 1.21V and 0.6V on commercially available 40ULP processes, across process corners, and across a -40°C to +125°C temperature range. The PowerMiser SRAM family delivers more than 50% dynamic power savings and approximately 20% static power savings compared to industry standard SRAMs available on commercially available 40ULP processes.